Our Vibrating Screen
Vibrating Screen mounted on top of the EHP 1500. Also compatible with the EHP 2000. Rubber isolators between the screen and the hopper provide optimum vibration from the screen because the vibrator is designed to vibrate the screen and not the pump. Screen can be slid from one side or the other.
A better screen
The goal of Monolithic Equipment Manufacturing is to design and create equipment and supplies that make dome building easier. Our new Vibrating Screen definitely makes concrete mixing and spraying much smoother. David South, President of Monolithic said, “I have worked with lots of screens and this one is, by far, better than 99% of what’s available.”
Monolithic’s Vibrating Screen is specifically designed to fit on the hopper of all our pumps. Its sole purpose is to filter out wrong-size aggregate and trash that often comes in aggregate and/or concrete from Ready Mix plants. Also, sand or aggregate may not always mix well. This screen is not intended for the mixer.
How it works
The screen’s dimensions are such that the mixer will dump directly into it. The screen is equipped with an electric vibrator, the most durable and quietest vibrator available. It sits on isolators so aggregate has less tendency to pack the concrete in the pump. The screen can be partially slid off the hopper, making space so the mixture can be agitated with a shovel or the hopper can be cleaned.
The electrically driven vibrator is sized to shake the screen hard enough to drop normal aggregate through without manual effort. Weighing only 100 pounds, the screen is relatively light and easy to handle. Its added hook at the end of the angle iron allows the screen to be stood upright on either end of the hopper. The screen for the small pump can only stand on one end.
Updated: April 20, 2009
