Fly ash closely resembles volcanic ashes used in production of the earliest known hydraulic cements about 2,300 years ago. Those cements were made near the small Italian town of Pozzuoli – which later gave its name to the term pozzolan. A pozzolan is a siliceous/aluminous material that, when mixed with lime and water, forms a cementitious compound. Fly ash is the best known, and one of the most commonly used, pozzolans in the world. (Continued…)

To bend or not to bend? That is the question if you’re talking about bending reinforcing steel bars (rebar) that are partially embedded in concrete, as we do in the Monolithic Dome construction process. (Continued…)

If you want to start a fight, just ask a room full of spray concrete operators: What’s the best system for applying concrete? (Continued…)

In 2006 in Shokan, New York, work began on Peggy Atwood’s Monolithic Dome home, that has two intersecting sections: 40′ × 23′ and 30′ × 18′. Now Peggy has a slideshow of that construction – and a lot more. If you’ve ever wondered what all goes into the building of a dome-home, watch this slideshow. It begins with the clearing of the site to a completed, furnished, beautiful Monolithic Dome home. (Continued…)

You may find this article helpful if your Monolithic Dome Airform has any stitched seams and also has a barrier material, such as foam along the exterior terminal edge of the Airform. (Continued…)

The Energy Detective is a device that lets you monitor the electric usage of your home. I bought one to track the energy usage of my dome-home and windmill. I was very surprised to find so much power in such a small device. According to the manufacturer of The Energy Detective (TED), just knowing what your house is doing and taking small steps to avoid using so much will drop your power bill 13% on average. (Continued…)

We recently moved one of our Monolithic Cabins to one of our rental sites, and I was asked to give a little slideshow on how these cabins were moved and hooked up for service. (Continued…)

When we started the El Dorado Chemical Company plant in early 2010, we started doing some research on different additives to put in the concrete, to help with its chemical resistance. Early in our research, we came across an additive called MetaMax. (Continued…)

Last month I was able to visit the fertilizer blend plant that we built in Bryan Texas, and it was really exciting to hear what the managers of the plant had to say. (Continued…)

Chris Ecker, a Monolithic Dome owner and designer, says, “There are numerous ways you could go about designing your dream dome, whatever the intended use will be. Based on our experience, here are our suggestions.” (Continued…)

It’s important to understand why we use rebar (reinforcing steel bar) in concrete. It’s used to absorb tension forces in concrete, since concrete has very poor strength as a tension material. So correct placement of rebar is essential. (Continued…)

A second floor can be designed in a Monolithic Dome home. But we suggest you consider some important factors when deciding whether or not to put in a second floor in your Monolithic Dome home. (Continued…)

How long are you planning to stay in your dream-dome? Probably decades and well into your elder years. With this in mind and a need for some practical, low- or no-cost universal design elements to handle physical needs, we offer these practical ideas that we incorporated into our dome. (Continued…)

When the iPhone came out, we could immediately recognize the benefits. We knew that if we were going to make the switch to the iPhone, we would have to come up with a dome calculator. (Continued…)

You will hear a lot more about our new Paxis Scaffold in the future on Monolithic.com, but in the meantime I will post some raw video clips. It’s hard to describe how nice this scaffold is, but with the new drive motors and the 10′ stance, this scaffold makes one of the sturdiest, safest platforms I have ever seen. (Continued…)

The new paxis scaffold was a huge success, even though there are a few things that we are going to do differently. The one thing that we didn’t expect, was that it was so heavy that it started to make some pretty substantial ruts in the ground. We have been toying around with a few different ideas. First, I think we will pour a concrete circle in the middle of the dome so that the pivot point and tires have a harder surface to rotate on. Secondly, I think we will try to find some wider tires for the outside wheels, and change the way the motor is mounted so we have more ground clearance. (Continued…)

Problem: Scaffold an 88 foot dome that has only 4 36″ standard doors?
Solution: Expand our already proven Polar Scaffold to fit that size of a dome. (Continued…)

Through the years of dome building we have always been playing a guessing game when it comes to reinforcement. So we finally found a way to find out once in for all, what is happening in these domes? (Continued…)